2026-08-17

DataCite · arXiv · 2026-07-23 · Jinglin Yu, Feiyang Wu, Longying Wen, Chongxian Yuan · 新论文 2026-08-08 · 相关度 32.4

英文原题Reliability-Aware Bayesian Optimization of 1310 nm PCSELs with FDTD Verification

中文摘要接近 1310 nm 的光子晶体表面发射激光器（PCSEL）是用于光通信和传感的颇具吸引力的窄光束光源，但其最终设计优化成本高昂。微小的几何结构变化会同时改变带边共振、腔体泄漏、远场发散角以及高 Q 衰减拟合的数值稳定性，而每次全波试算都需要进行时域仿真。我们将一款商用有限差分时域求解器与可靠性感知型贝叶斯优化（BO）循环相结合，对八个局部设计变量进行优化。每次完成仿真后，都会更新用于选择下一种几何结构的代理模型。候选设计的排序综合考虑波长和光束质量要求，并采用由求解器报告的相对拟合误差估计值 dQ/Q 推导出的可靠性校正指标 Q_eff。在从同一参考模型开始的三次各含 80 次评估的运行中，BO 每次产生了 5—15 个通过联合筛选的候选设计。从全新模型副本重建的设计保持了 Q_eff=4.33×10^6—7.76×10^6，在 1308.23—1310.90 nm、发散角约为 0.84° 的条件下，相较基线指标提高了 60—108 倍。在预算相同的情况下，BO 获得了最高的严格筛选平均产出量（9.0 个候选设计），相比之下，差分进化为 7.0 个，拉丁超立方采样为 1.5 个，尽管对照方法偶尔也能达到峰值 Q_eff。场分布图、共振光谱和局部扰动进一步确定了与折射率相关的波长调控手段和与孔尺寸相关的泄漏调控手段。由此制定的 FDTD 计算预算能够生成一批波长兼容、窄光束且可复现的高 Q PCSEL 候选设计，而无须轻信单次过于乐观的衰减拟合。

英文摘要Near 1310 nm photonic-crystal surface-emitting lasers (PCSELs) are attractive narrow-beam sources for optical communication and sensing, but their final design refinement is costly. Small geometry changes simultaneously shift the band-edge resonance, cavity leakage, far-field divergence, and the numerical stability of a high-$Q$ decay fit, while every full-wave trial requires a time-domain simulation. We couple a commercial finite-difference time-domain solver to a reliability-aware Bayesian optimization (BO) loop over eight local design variables. Each completed simulation updates the surrogate used to choose the next geometry. Candidate ranking combines wavelength and beam-quality requirements with a reliability-adjusted metric $Q_{\mathrm{eff}}$ derived from the solver-reported relative fit-error estimate $dQ/Q$. Across three 80-evaluation runs from the same reference model, BO produced 5--15 candidates per run that passed the joint filter. Designs reconstructed from fresh model copies retained $Q_{\mathrm{eff}}=4.33\times10^6$--$7.76\times10^6$, a 60--108-fold increase over the baseline metric, at 1308.23--1310.90~nm with approximately $0.84^{\circ}$ divergence. Under equal budgets, BO gave the highest mean strict-filter yield (9.0 candidates), compared with differential evolution (7.0) and Latin-hypercube sampling (1.5), although the controls occasionally matched the peak $Q_{\mathrm{eff}}$. Field maps, resonance spectra, and local perturbations further identify an index-related wavelength handle and a hole-size-related leakage handle. The resulting FDTD budget produces a pool of wavelength-compatible, narrow-beam, and reproducible high-$Q$ PCSEL candidates without trusting a single optimistic decay fit.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：FDTD / AI 代理模型/逆向设计。
- 可转化内容：适合沉淀成验证指标或参数先验，尤其是 far field。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

Crossref · Laser & Photonics Reviews · 2026-07-23 · Tong Xu, Meixin Feng, Rui Xi, Xiaoqi Yu · 新论文 2026-07-26 · 相关度 35.0

英文原题3.2 W GaN‐Based Photonic‐Crystal Surface‐Emitting Laser

中文摘要光子晶体表面发射激光器（PCSEL）凭借其单模运行和窄光束发散的独特能力，已成为 LiDAR、自由空间通信和材料加工等高功率、高亮度应用中颇具前景的光源。然而，将 PCSEL 扩展到蓝光波段仍面临挑战，主要原因是 GaN 基材料的折射率较低且波长较短，这会削弱光反馈，并增加制造难度和光散射损耗，从而导致极高的激光阈值。在本工作中，我们展示了在 GaN 衬底上采用优化的外延结构和光子晶体设计制造的、无需再生长且工作于 430.5 nm 的瓦级 GaN 基 PCSEL。该器件的阈值电流密度为 4 kA/cm²，室温峰值输出功率达到 3.2 W，据我们所知，这是目前报道的最高输出功率。本工作为采用简化制造工艺实现高功率可见光 PCSEL 提供了一条可行路径，并在未来的高亮度照明和显示应用中展现出巨大潜力。

英文摘要ABSTRACT Photonic‐crystal surface‐emitting lasers (PCSELs) have emerged as promising light sources for high‐power, high‐brightness applications such as LiDAR, free‐space communication, and material processing, owing to their unique capabilities for single‐mode operation and narrow beam divergence. However, extending PCSELs into the blue wavelength regime remains challenging, primarily due to the low refractive index and short wavelength of GaN‐based materials, which weakens optical feedback and increases the fabrication difficulty and optical scattering loss, resulting in very high lasing thresholds. In this work, we demonstrate regrowth‐free, watt‐class GaN‐based PCSELs operating at 430.5 nm, fabricated on GaN substrates using an optimized epitaxial structure and photonic crystal design. The device achieved a threshold current density of 4 kA/cm 2 , and a peak output power of 3.2 W at room temperature, which, to our knowledge, is the highest output power reported. This work provides a viable pathway toward high‐power visible PCSELs with simplified fabrication processes, offering significant potential for high‐brightness lighting and display applications in the future.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

Crossref · Photonics · 2026-07-11 · Jianxin Zhang, Gaoben Shi, Xiaoyun Liu, Haizhu Sun · 新论文 2026-08-08 · 相关度 15.1

英文原题A 1064 nm Deep-Etched Wide-Ridge Waveguide Slab-Coupled Photonic Crystal Semiconductor Laser

中文摘要半导体激光器是光通信、光存储及其他领域的关键器件。实现单模、高功率和高光束质量输出是激光技术的重要研究目标。传统的板耦合光波导激光器能够有效抑制高阶模式，但存在光限制因子低和脊宽受限的问题。本文提出一种 1064 nm 深刻蚀宽脊波导板耦合光子晶体半导体激光器。在传统板耦合光波导中引入光子晶体结构。通过数值仿真分析光场和模式特性，验证了该结构在提高光限制因子以及利用深刻蚀宽脊波导实现单模运行方面的可行性。不同于传统光子晶体激光器，该设计为高性能光子晶体半导体激光器的设计提供了一条新路径。

英文摘要Semiconductor lasers are key devices in optical communication, optical storage and other fields. Achieving single-mode, high-power and high-beam-quality output is an important research goal in laser technology. Conventional slab-coupled optical waveguide lasers can effectively suppress higher-order modes, but suffer from a low optical confinement factor and limited ridge width. This paper proposes a 1064 nm deep-etched wide-ridge waveguide slab-coupled photonic crystal semiconductor laser. A photonic crystal structure is introduced into the conventional slab-coupled optical waveguide. The optical field and mode characteristics are analyzed by numerical simulation, verifying the feasibility of the structure in improving the optical confinement factor and realizing single-mode operation with a deep-etched wide-ridge waveguide. Different from traditional photonic crystal lasers, this design provides a new route for high-performance photonic crystal semiconductor laser design.

为什么与你有关
为什么与你有关：
- 主线关联：更偏photonics / photonic crystal，可作为 PCSEL 周边器件物理或数值方法补充。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

Crossref · Applied Physics Letters · 2026-07-07 · Erin M. Raftery, Devon O. Lee, Daniel W. Pflug, Adrian Birge · 新论文 2026-07-09 · 相关度 35.0

英文原题Buried dielectric quasi-photonic-crystal surface-emitting lasers

中文摘要我们报道了一种准光子晶体表面发射激光器（QPCSEL），其采用被高折射率外延半导体包围的亚微米低折射率掩埋介质结构来形成准光子晶体层。我们展示了掩埋介质 QPCSEL 在室温下的光泵浦激光发射，其发射波长为 1.5 μm。QPCSEL 使用准周期光子晶体取代传统的周期性折射率图案，从而产生单模发射。我们的掩埋介质方案能够实现光子晶体的固态集成，同时在外延半导体再生长过程中保留复杂的图案化几何结构。

英文摘要We report a quasi-photonic-crystal surface-emitting laser (QPCSEL) that employs sub-micron, low-index buried dielectric features surrounded by high-index epitaxial semiconductor to form the quasi-photonic-crystal layer. We demonstrate photopumped lasing from a buried dielectric QPCSEL at room temperature with emission wavelength at 1.5 μm. QPCSELs replace the conventional periodic refractive index pattern with a quasi-periodic photonic crystal, which produces single mode emission. Our buried dielectric approach enables solid-state integration of the photonic crystal while preserving the complex patterned geometry during epitaxial semiconductor regrowth.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

DataCite · arXiv · 2026-06-22 · Cen Chen, Haitao Huang, Jiazhi Mao, Feifan Xu · 新论文 2026-08-08 · 相关度 31.1

英文原题DDSNet: Dual-domain Symmetry-aware Network for PCSEL Property Prediction

中文摘要高效探索光子晶体（PhC）晶格的设计空间对于开发光子晶体表面发射激光器至关重要。尽管耦合波理论（CWT）提供了有效的物理框架，但其计算成本对于大规模探索而言仍高得难以承受，这推动了对神经网络代理模型的需求。然而，现有 AI 模型未能充分利用 CWT 所揭示的 PhC 单元介电图案的两个关键因素：频谱分量和非对称结构，而这两者在很大程度上决定了器件的物理特性。这种不匹配削弱了代理模型的准确性和筛选可靠性，在结构敏感区域尤为明显。为解决这一问题，我们提出双域对称性感知网络（DDSNet）。该网络将平移等变频谱滤波与对称性诱导的结构先验相结合。频谱滤波在保持晶格上平移等变性的同时，将频谱归纳偏置注入视觉模型。与此同时，结构先验将晶格特征分解为与不可约表示相关且按对称性分辨的分量，并在不同分支中对其进行处理。实验表明，DDSNet 在特性预测和高通量筛选方面显著优于现有 AI 基线模型，并在结构敏感区域表现出更高的可靠性。尤为重要的是，分量掩蔽分析表明，该网络成功学习到了与物理先验一致的特性特异性依赖关系。这些结果表明，DDSNet 能够有效捕获具有物理意义的结构—特性关系，从而为探索 PhC 设计空间建立了一种高度可靠的神经网络代理模型。

英文摘要Efficient exploration of the photonic crystal (PhC) lattice design space is essential for developing photonic crystal surface-emitting lasers. While coupled-wave theory (CWT) provides an effective physical framework, its computational cost remains prohibitive for large-scale exploration, driving the demand for neural surrogates. However, existing AI models underexploit two key factors of PhC unit-cell dielectric patterns indicated by CWT: spectral components and asymmetric structures, which largely govern devices' physical properties. This mismatch weakens surrogate accuracy and screening reliability, especially in structure-sensitive regions. To address this, we propose the Dual-Domain Symmetry-Aware Network (DDSNet). It integrates translation-equivariant spectral filtering with a symmetry-induced structural prior. The spectral filtering injects a spectral inductive bias into vision model while preserving translation equivariance on lattices. Meanwhile, the structural prior decomposes lattice features into irreducible representation-associated, symmetry-resolved components and processes them in separate branches. Experiments demonstrate that DDSNet significantly outperforms existing AI baselines in property prediction and high-throughput screening, exhibiting superior reliability in structure-sensitive regions. Crucially, component masking analyses reveal that the network successfully learns property-specific dependencies aligned with physical priors. These results indicate that DDSNet effectively captures physically meaningful structure-property relationships, establishing a highly reliable neural surrogate for PhC design space exploration.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：CWT。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

OpenAIRE · Applied Physics Letters · 2026-06-15 · Zhiwei Sun, Bolin Zhou, Yuzhen Zheng, Yongchen Miao · 新论文 2026-06-19 · 相关度 42.6

英文原题Regrowth-free blue GaN-based photonic crystal surface-emitting lasers with triangular air holes

中文摘要我们报道了采用无需再生长方法成功实现的室温蓝光 GaN 光子晶体表面发射激光器（PCSEL）二极管。通过采用具有改进三角形空气孔的方形晶格光子晶体结构，我们实现了稳定的二维单模激光发射。该器件的阈值电流密度为 5.2 kA/cm²，并发射高斯形光束，光束发散角极低，测得仅为 1.15 mrad（0.066°）。此外，三角形空气孔的对称性破缺特性确保了垂直于三角形长边的稳定线偏振。本工作表明，使用具有简单孔几何形状的非再生长制造工艺即可实现高光束质量的蓝光 PCSEL，为高性能蓝光激光光源铺平了道路。

英文摘要We report the successful realization of a room-temperature blue GaN photonic crystal surface-emitting laser (PCSEL) diode fabricated using a regrowth-free approach. By employing a square lattice photonic crystal structure with modified triangular air holes, we achieve robust two-dimensional single-mode lasing. The device operates with a threshold current density of 5.2 kA/cm2 and emits a Gaussian-shaped beam with exceptionally low beam divergence, measured at 1.15 mrad (0.066°). Furthermore, the symmetry-breaking nature of the triangular air holes enforces a stable linear polarization perpendicular to the long edge of the triangle. This work demonstrates that high-beam-quality blue PCSELs can be achieved using non-regrowth fabrication processes with simple hole geometry, paving the way for high-performance blue laser sources.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

OpenAIRE · Applied Optics · 2026-06-11 · Siyu Chen, Jingwei Chen, Xingyu Liu, Zhiyuan Jiang · 新论文 2026-06-15 · 相关度 32.5

英文原题Simulation study of a low-threshold, high-efficiency 1.55 µm InP PCSEL enabled by a bottom metal-capped DBR, peripheral DBRs, and a shifted triple-hole photonic crystal

中文摘要1.55 µm 光子晶体表面发射激光器（PCSEL）因具有眼安全性和低光纤损耗，对光通信和 LiDAR 应用极具吸引力。然而，其性能受到阈值增益与斜率效率之间权衡的限制，同时也受到传统分布式布拉格反射器（DBR）结构的反射率和相位控制能力的制约。在本工作中，据我们所知，我们对一种新型 InP 基 PCSEL 设计进行了理论和数值研究。具体而言，金属封盖 DBR 由三对 SiO₂/TiO₂ 层和一层 Au 构成，在提供高反射率的同时显著降低了制造复杂度。此外，在光子晶体（PC）区域周围引入 DBR，以抑制面内损耗并增强激光模式的反馈。进一步地，移位三孔光子晶体能够灵活控制面内和垂直耦合强度，从而在阈值增益与斜率效率之间实现优化平衡。采用传输矩阵法和三维耦合波理论（3D-CWT）评估器件性能。结果表明，优化后的结构具有 16 cm⁻¹ 的低激光振荡阈值增益和相应的 76 cm⁻¹ 阈值材料增益，同时具有 0.18 W/A 的高斜率效率，为工作于 1.55 µm 的高性能 InP 基 PCSEL 提供了一种颇具前景的理论设计策略。

英文摘要Photonic-crystal surface-emitting lasers (PCSELs) at 1.55 µm are highly attractive for optical communication and LiDAR applications owing to eye safety and low fiber loss. However, their performance is limited by the trade-off between threshold gain and slope efficiency, as well as by the reflectivity and phase control of conventional distributed Bragg reflector (DBR) structures. In this work, we present a theoretical and numerical investigation of a novel InP-based PCSEL design, to our knowledge. Specifically, the metal-capped DBR is composed of three pairs of SiO 2 /TiO 2 layers and an Au layer, providing high reflectivity while substantially reducing fabrication complexity. In addition, DBRs surrounding the photonic crystal (PC) region are introduced to suppress in-plane loss and enhance the feedback of the lasing mode. Furthermore, a shifted triple-hole photonic crystal enables flexible control of the in-plane and vertical coupling strengths, achieving an optimized balance between threshold gain and slope efficiency. The device performance is evaluated using the transfer-matrix method and three-dimensional coupled-wave theory (3D-CWT). As a result, the optimized structure exhibits a low threshold gain for lasing oscillation of 16cm −1 and a corresponding threshold material gain of 76cm −1 , together with a high slope efficiency of 0.18 W/A, providing a promising theoretical design strategy for high-performance InP-based PCSELs operating at 1.55 µm.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：CWT。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

OpenAIRE · Optics Express · 2026-06-11 · Qingyuan Zhang, Ming Lü, Jiang Hu, Qi Dai · 新论文 2026-06-13 · 相关度 28.0

英文原题Size scaling law for radiation losses of modes in photonic crystal surface emitting devices

中文摘要光子晶体表面发射激光器（PCSEL）因能够产生超高功率、低发散角的激光束而受到广泛关注。这是因为它们支持高功率单模激光发射，其模式体积比传统半导体激光器大数个数量级。PCSEL 有限的横向尺寸是限制其激光模式体积并进而限制其输出功率的主要因素。我们证明，总腔损耗 α=α⊥+α∥ 与器件尺寸 L 之间的缩放关系为：表面辐射损耗按 α⊥∼O(L⁻²) 缩放，而边缘辐射损耗按 α∥∼O(L⁻³) 缩放。这两种缩放关系均可由能带图中复频率 ω(k) 的二阶展开来解释。我们的结果为设计大面积类 PCSEL 器件时估算尺寸效应提供了指导。

英文摘要Photonic-crystal surface-emitting lasers (PCSELs) have garnered significant attention due to their ability to generate laser beams with ultra-high power and low divergence. This is because they support high-power single-mode lasing with volumes orders of magnitude larger than those of conventional semiconductor lasers. The finite lateral size in a PCSEL is a primary factor limiting its lasing mode volume and, consequently, its output power. We demonstrate that the scaling relation between the total cavity loss α = α ⊥ + α ∥ and the device size L is such that the surface radiation loss scales as α ⊥ ∼ O ( L −2 ), while the edge radiation loss α ∥ ∼ O ( L −3 ). Both scaling relations can be explained by the second-order expansions of the complex frequency ω ( k ) of the band diagram. Our results provide a guideline for estimating the size effect when designing large-area PCSEL-like devices.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：适合沉淀成验证指标或参数先验，尤其是 mode volume。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

Crossref · 2026 International Conference Laser Optics (ICLO) · 2026-06-01 · I.V. Oreshko, V.V. Zolotarev, S.O. Slipchenko, A.S. Nekrasov · 新论文 2026-08-09 · 相关度 15.5

英文原题Surface-emitting semiconductor IR laser with resonator based on 2D photonic crystal

为什么与你有关
为什么与你有关：
- 主线关联：更偏photonics / photonic crystal，可作为 PCSEL 周边器件物理或数值方法补充。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

OpenAIRE · Journal of Semiconductors · 2026-05-01 · Yuzhen Zheng, Zhiwei Sun, Tong Xu, Bolin Zhou · 新论文 2026-06-09 · 相关度 26.8

英文原题Low-threshold GaN surface emitting lasers: A comparative study of circular grating and photonic crystal designs

中文摘要我们展示了两种无需外延再生长制造的 GaN 基表面发射激光器（SEL）在室温下的脉冲激光发射。我们对圆形光栅设计（CGSEL）与光子晶体设计（PCSEL）进行了直接比较。通过将光子结构直接刻蚀到 p-GaN 包层中，并采用图案化氧化铟锡（ITO）顶部接触来制备这些器件。两种设计在脉冲电流注入下均在约 438 nm 处产生激光。包含中心缺陷的 CGSEL 通过与带隙缺陷模式耦合，实现了较低的阈值电流密度（<1 kA/cm²）和较小的发散角（≈0.15°）。相比之下，PCSEL 的阈值电流密度更高，并在一维带边模式上产生激光，从而形成十字形远场图案。这些结果证实，无需再生长的方法是实现可制造 GaN SEL 的一条可行路径。尤为重要的是，该比较研究表明，CGSEL 缺陷模式设计是在低限制外延结构中实现高性能激光发射的更稳健路径。

英文摘要Abstract We demonstrate room-temperature pulsed lasing of two types of GaN-based surface emitting lasers (SEL) fabricated without epitaxial regrowth. We present a direct comparison between a circular grating (CGSEL) and a photonic crystal (PCSEL) design. The devices are realized by etching the photonic structures directly into the p-GaN cladding, and utilizing a patterned indium tin oxide (ITO) top contact. Both designs exhibit lasing near 438 nm under pulsed current injection. The CGSEL, incorporating a central defect, achieves a low threshold current density (<1 kA/cm 2 ) and a small divergence angle (≈0.15°) by coupling to a bandgap defect mode. In contrast, the PCSEL shows a higher threshold current density and lases on a 1D band-edge mode, resulting in a cross-shaped far-field pattern. These results confirm the regrowth-free method as a viable route for manufacturable GaN SELs. Crucially, the comparative study identifies the CGSEL defect-mode design as a more robust path toward high-performance lasing in low-confinement epitaxial structures.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：适合沉淀成验证指标或参数先验，尤其是 far field / divergence angle。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

Crossref · IEEE Transactions on Nuclear Science · 2026-04-01 · Shota Kimura, Ryohei Morita, Takuya Inoue, Yosuke Hashimoto · 新论文 2026-08-09 · 相关度 17.7

英文原题Radiation Tolerance of Photonic-Crystal Surface-Emitting Lasers for Space Applications

中文摘要光子晶体表面发射激光器（PCSEL）是一种能够同时实现高输出功率和单模运行的半导体激光器。由于 PCSEL 能够以较低的尺寸、重量和功耗产生光，因此对包括天基系统在内的众多应用具有吸引力。然而，PCSEL 的抗辐射能力尚未得到研究，因此尚不清楚其能否承受空间辐射环境。具体而言，辐射对光子晶体层波长尺度结构的影响，以及其辐射耐受性对 PCSEL 固有三维激光机制的依赖关系，均尚未得到研究。在本工作中，我们以总剂量效应为重点，评估了 PCSEL 的辐射耐受性。在受到 21 和 98 MeV 质子辐照后，PCSEL 的阈值电流升高。尽管阈值电流的增幅略高于传统激光二极管的报道值，但光子晶体层的功能得以保留。由 ⁶⁰Co 辐照产生的伽马射线导致 PCSEL 的电阻略有增加。基于实验结果的计算表明，在预期空间环境中，PCSEL 特性的退化程度足够小。

英文摘要Photonic-crystal surface-emitting lasers (PCSELs) are semiconductor lasers capable of simultaneously achieving high output power and single-mode operation. Because PCSELs can generate light with low size, weight, and power, they are attractive for use in numerous applications, including space-based systems. However, the radiation hardness of PCSELs has not been investigated, so it is unclear whether they can withstand the space radiation environment. Specifically, the impact of radiation on the wavelength-scale structure of a photonic-crystal layer and the dependence of its radiation tolerance on the 3-D lasing mechanism inherent to PCSELs have not been studied. In the present work, we evaluated the radiation tolerance of a PCSEL, focusing on total dose effects. When irradiated with 21 and 98 MeV protons, the current threshold of the PCSEL increased. Although the increase in the threshold current was slightly larger than that reported for conventional laser diodes, the functionality of the photonic-crystal layer was preserved. Gamma rays emitted from 60Co irradiation caused a slight increase in the resistance of the PCSEL. Calculations based on the experimental results indicated that the degradation of PCSEL characteristics in the expected space environment is sufficiently small.

为什么与你有关
为什么与你有关：
- 主线关联：更偏photonics / photonic crystal，可作为 PCSEL 周边器件物理或数值方法补充。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

Crossref · Gallium Nitride Materials and Devices XXI · 2026-03-05 · Åsa Haglund, Doğukan Apaydın, Lars Persson, Moritz Riedel · 新论文 2026-08-09 · 相关度 15.0

英文原题Deep-ultraviolet photonic crystal surface-emitting lasers

为什么与你有关
为什么与你有关：
- 主线关联：更偏photonics / photonic crystal，可作为 PCSEL 周边器件物理或数值方法补充。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

OpenAIRE · Solid State Lasers XXXV: Technology and Devices · 2026-03-04 · Petros Androvitsaneas, Zhongze Ren, Pavlo Ivanov, Anna O'Dowd · 新论文 2026-08-09 · 相关度 22.6

英文原题Photonic crystal surface emitting laser bandstructure investigation using Fourier microscopy

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

OpenAIRE · IEEE Photonics Technology Letters · 2026-02-15 · Ziyuan Liao, Yufei Wang, Yuan Ma, Yingqiu Dai · 新论文 2026-06-28 · 相关度 34.0

英文原题Quantum Cascade Photonic Crystal Surface-Emitting Laser With Lateral Coupling Cavity at 9.4 μ m

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。

OpenAIRE · Optics · 2026-02-02 · Bochao Zhang, Minyan Zhang, Lei Li, Jianglang Bie · 新论文 2026-08-09 · 相关度 42.9

英文原题Design of Double-Lattice Photonic Crystal of DUV Laser by ANN-RBF Neural Network

中文摘要本研究设计了一种双晶格光子晶体结构，在不使用任何分布式布拉格反射器（DBR）的情况下实现深紫外激光发射，这种器件被称为光子晶体表面发射激光器（PCSEL）。采用平面波展开（PWE）方法研究了各种结构参数对共振波长的影响。利用随机森林算法，我们确定晶格常数对共振波长的重要性为 95.24%。此外，我们通过径向基函数（RBF）网络算法，实现了从目标波长到最优结构参数的双晶格光子晶体逆向设计。对极限学习机（ELM）和反向传播（BP）算法的比较分析表明，基于 RBF 的性能明显优于其他算法的训练结果。训练结果中，测试集晶格常数的平均绝对误差（MAE）为 0.7610 nm，均方根误差（RMSE）为 1.143×10⁻³ nm，平均绝对相对误差（MARE）为 5.489×10⁻³。我们验证了该算法的可靠性，并设计了 13 组具有不同外延结构的光子晶体。与平面波展开方法相比，其均方误差（MSE）为 0.6188 nm²。本工作证明了该方法对 GaN 基器件中各种波段和外延结构的适用性，为深紫外 PCSEL 的快速迭代提供了一种新方法。

英文摘要In this study, a double-lattice photonic crystal structure was designed to achieve deep ultraviolet lasing without the use of any Distributed Bragg Reflector (DBR), which is called a photonic-crystal surface-emitting laser (PCSEL). The plane wave expansion (PWE) method was used to study the influence of various structural parameters on the resonant wavelength. Utilizing the random forest algorithm, we determined that the importance of the lattice constant to the resonant wavelength is 95.24%. Furthermore, we realized the reverse design of double-lattice photonic crystals from the target wavelength to optimal structural parameters through a radial basis function (RBF) network algorithm. Comparative analysis of the extreme learning machine (ELM) and back propagation (BP) algorithms demonstrated that RBF-based performance was notably superior to the training outcomes of other algorithms. The mean absolute error (MAE) of the lattice constant of the test set in the training results was 0.7610 nm, root mean square error (RMSE) was 1.143×10-3 nm, and mean absolute relative error (MARE) was 5.489×10-3. We verified the reliability of the algorithm and designed 13 groups of photonic crystals with different epitaxial structures. The mean square error (MSE) was 0.6188 nm2 compared with that of the plane wave expansion method. This work demonstrates applicability across various wavebands and epitaxial structures in GaN-based devices, providing a novel approach for the rapid iteration of deep ultraviolet PCSELs.

为什么与你有关
为什么与你有关：
- 主线关联：直接服务 PCSEL 方向，优先看结构参数、耦合机制、出光/远场和验证口径。
- 可用线索：先看是否能抽出结构参数、指标定义或仿真设置。
- 可转化内容：先判断能否变成一个仿真 case、baseline、验证指标或参数先验。

今日必看：优先判断是否进入 PCSEL / CWT / 仿真建模文献库。